Replace Hard Drive for OMEN by HP Obelisk 875-1000, 875-0xx, 870-xxx Desktop PC | HP OMEN | HP


How to Replace the Hard Drive NOTE: Only certain models in this platform series support the configuration of the following components: glass side panel, dust cover, liquid cooling system, lighting control module, LED lighting bar Before you begin: Remove the access panel. Removal Detach the hard drive’s power cable and SATA cable from the base of the hard drive cage. Disconnect the hard drive power cable and the SATA cable from the hard drive. Push the two plastic tabs at the top of the hard drive holder towards each other to flex the holder. Keeping the hard drive holder flexed, slide the holder and the hard drive out of the hard drive cage. NOTE: The secondary hard drive holder adjacent to the hard drive is removed in the same way. Grasp the holder on either side and flex it to remove the hard drive from the holder. Remove the hard drive and reserve the holder. Replacement Align the grommet pins on one side of the hard drive holder to the holes on one side of the hard drive. Insert the grommet pins into one side of the hard drive. Flex the holder to insert the grommet pins into the other side of the hard drive. Slide the hard drive and its holder into the hard drive cage. Connect the SATA cable and power cable to the hard drive. Secure the SATA and power cables with the clip at the base of the hard drive cage.

Leave a Reply

Your email address will not be published. Required fields are marked *