NOTE: Only certain models in this platform series support the configuration of the following components: glass side panel, dust cover, liquid cooling system, lighting control module, LED lighting bar. Before you begin: Remove the access panel. Removal Remove the P1 Phillips-head screws That secure the graphics card to the top of the expansion slot on the chassis. The number of screws to remove depends on the graphics card. Depending on the graphics card installed, push down (or push sideways) the retaining lever on the expansion slot on the motherboard. Grasp the top of the graphics card on either side And gently move it from side to side before lifting it from the expansion slot. Replacement Grasp the top of the graphics card on either side and align the golden fingers with the expansion slot on the motherboard. Place the graphics card into the expansion slot and, using minimal force, press down until the retaining lever clicks into place. Replace the single P1 Phillips-head screw That secures the graphics card to the top of the expansion slot on the chassis.